Rotary Cutting Rules:

The ‘Infinity’ range of rotary cutting and creasing rules are available for all types of rotary die cutting presses. In back slotted form for the customer to edge radius, or in the edge radiused condition to the required diameter. It is also available in plain back form for use across the cylinder.

Rotary Cutting Rules

Top of Page

Stitch Flap Knives:

All types and sizes available to suit every kind of machine.

Stitch Flap Knives

Top of Page

Roller Saver Perforating System:

Height of perforating rule: 23.00mm (0.906”)
Thickness of brass impression strip: 0.50mm (0.0205”) Standard width of impression strip: 12 points, but any width supplied on request. The cutting edge of the perforating rule is below type height and the paper is depressed on to it by the impression strip on the tympan.

Brass impression strip sold separately or in packs of 12 or 100.

Roller Saver Perforating System

Top of Page

Label Rules (including Perforating Rule):

Label rules are available in 1, 1 and 2 point thicknesses, in a range of heights.

All are available in hard or soft grade steel.

Perforating Rules are available in an extensive range, including micro perf. (deep cut or standard).

No image available

Top of Page

Continuous Stationery Perforating Wheels:

Standard perforating wheels Usually supplied between 3 and 17 tpi in several gap sizes.

Micro perforating wheels – deep cut 30, 40, 50, 60 and 70tpi.

We offer a re-sharpening service
see our info page for more details

Continuous Stationery Perforating Wheels

Top of Page

Steel Cutting Rules:

These ‘Infinity’ range of cutting rules represent the maximum in accuracy, ductility and performance and include the conventionally ground edge cutting rules, the Mirracut machined edge cutting rules and the range of edge-hardened cutting rules. They are available in standard lengths of 1 metre, also available in coils and short lengths cut to order. Many various heights available.

standard_steel_rule_bevels.png (9149 bytes)

Top of Page

Mirracut Steel Cutting Rules:

Have a machined instead of a ground edge. The ultra smooth satin-like finish provides two important features. Firstly, the machining of the edge effectively increases the cutting life. Secondly, the perfectly smooth bevel and absence of roughness and undulations inherent in a ground edge does reduce the incidence of dust and swarf.

standard_steel_rule_bevels.png (9149 bytes)

Top of Page

Perforating Rules:

This ‘Infinity’ range of perforating rules is made entirely from the hardest bronze rule to give the longest of runs. Any combination of tooth and gap width can be supplied. Shown here are a few of the standard perforating rules out of the many hundreds manufactured and stocked. Any variation on these can be supplied very quickly.

Perforating Rules

Top of Page

Wave Edge and Jigsaw Rules:

These wave edge rules, except large and extra large, have a flat body, waved on the edge only. All rules are supplied tip hardened to give a long cutting life, similar to that of an extra hard cutting rule. These jigsaw rules can be supplied in any pitch from 19mm upwards. Usually made from 2 point Flexicut with a long bevel/centre bevel cutting edge, tip hardened.

Wave Edge and Jigsaw Rules

Top of Page

Jigsaw Blades:

Precision made, these blades are available 3mm (1/8") deep giving 2, 3 and 4 point cut, 5mm (3/16") or 4mm (5/32") deep to give 3, 4 and 6 point cut and to facilitate easier turning 2.5mm (3/32") deep with a fine tooth for 1 1/2 point and 2 point cuts. These are available with or without pins or pinned at one end for most automatic machines, some with 7 reverse teeth to produce a smoother underside to the plywood.

For further information, please contact us:

Tel: +44 (0) 1858 - 462641
Fax: +44 (0) 1858 - 431616
e-mail:
sales@decimalrules.co.uk

Jigsaw Blades

Top of Page

Jigsaw Coils:

Coils are also available in various thicknesses and depths, 10 metres long.

For further information, please contact us:

Tel: +44 (0) 1858 - 462641
Fax: +44 (0) 1858 - 431616
e-mail:
sales@decimalrules.co.uk

Jigsaw Coils

Top of Page

Cut / Crease Combination Rule:

This rule saves the tedious business of putting in alternate pieces of cutting and creasing rules. Any cut/crease combination supplied. Please specify length of cut and crease also height of cut and height of crease.

Cut / Crease Combination Rule

Top of Page

Zipper Rule:

Manufactured from hard cutting rule to give long cutting life. This zipper rule, supplied left and right hand, gives a perfect tear-off strip.

Zipper Rule

Top of Page

V-Gap Rule:

A rule with very sharp pointed teeth, 3mm, 5mm or 7mm point to point, supplied on a 3 point body normally at a height of 50mm (Other heights available). This rule is used for cutting sheet polythene, low density foam materials and expanded polystyrene.

V-Gap Rule

Top of Page

Die Ejection Rubber:

We offer a comprehensive range of quality ejection rubbers in both open and closed cell structures, suitable for most die making applications.

Our ejection rubber is available in sheets, cur into strips or pads to suit your own special requirements.

Sizes 4mm to 16mm (3/16" to 1/2") available.
Our stick and strip adhesive is available in manageable 1 ltr containers.

Top of Page

Slot Rubber:

A range of slot rubbers and special rubbers are also readily available.

Our stick and strip adhesive is available in manageable 1 ltr containers

For further information, please contact us:

Tel: +44 (0) 1858 - 462641
Fax: +44 (0) 1858 - 431616
e-mail:
sales@decimalrules.co.uk

Top of Page

Brass Cut-Seal Combined Cutting and Welding Electrode:

These rules incorporate a cutting edge and a welding face in a single strip. The welding face may be plain or decorative, with or without a gap between the welding face and the cutting edge. Available on a 6 point body (2.10mm) and with a standard cutting height of 23.30mm (0.918”).

Cut-Seal Combined Cutting and Welding Electrode

Top of Page

Brass Rule Welding Electrodes:

Precision made from the finest materials, these brass rules are available in the faces shown. Also available are the cut-seal range of rules.

Brass Rule Welding Electrodes

Top of Page

Home Page: www.decimalrules.co.uk